Flight mission planner - Pix4D iOS
Flight Planning Application Guide Pix4DCapture
Pix4DCapture works best for you who fly with an Iphone or an Android. If you are using an Ipad we recommend DJI Ground Station Pro.
Step 1 – Plan mission
Click on the Polygon mission type to create a new mission. 
Step 2 – Map your area
Tap to put a polygon on the map. Drag the green dots to your borders and press on the small + to add another point. 
You can Press on a line and turn the lines around to change the flight course angle to optimize the flight time or to change where the mission starts and ends. 
Step 3 – Check advanced settings
Check your advanced settings and match them to your mission aim.
Check the Drone Guide to see which settings that fit you best.
In Pix4D you also have an advanced setting to set your camera to: Auto, Sunny or Cloudy. Use this feature if it is really Sunny or really Cloudy.
Step 4 – Save your mission
Saveyour mission so you know how you did last time when you are going to fly again. 
Step 5 - Camera settings
See the Pix4D camera settings guide.
Step 6 – Go fly!
Last step. Press start and good luck!
Make sure you have gone through all stages above.
